Precision Medical EasyVac Aspirator

Precision Medical EasyVac Aspirator

Brand/Manufacturer: PRECISION MEDICAL, INC
Hpfy Stores Save
  • Made in USA

Precision Medical EasyVac Aspirator is used to supply a continuous vacuum source adequate within the stated operating vacuum range, to aspirate fluids in medical suctioning procedures. This dual protection system consists of a float shut-off in the canister lid and an Inline Hydrophobic Filter to prevent backflow of fluid as well as airborne contaminants from entering the pump.

Why to Choose Precision Madical EasyVac Pm60 Aspirator?

  • Automatic resetting thermal limit switch
  • High performance 1/5 horsepower pump
  • Protective canister bracket
  • Velcro strap

Estimated Shipping Time: 6 Weeks

Precision Medical EasyVac Aspirator Features

  • Precision Medical EasyVac Aspirator has a protective canister bracket which not only holds the canister but also protects the gauge and adjustment knob from accidents
  • High performance 1/5 horsepower pump delivers 0 inHg to 26 inHg (0 mmHg to 660 mmHg)
  • Velcro strap allows the power cord to be wrapped securely to make portability easier
  • Extra strength premium suction feet attach the unit safely and securely to most surfaces, preventing spillage
  • Safety is assured with the automatic resetting thermal limit switch which prevents the unit from overheating


Medical EasyVac Aspirator User Manual

Medical EasyVac Aspirator Product Manual

Precision Medical EasyVac Aspirator Description


 

What to buy with EasyVac Aspirator?

How to Operate EasyVac Aspirator?

  1. Place Easy Vac Aspirator near electrical receptacle on a table, floor or other horizontal, smooth, hard surface. Allow a minimum of 4 in. (10 cm) clearance on all sides to ensure adequate air flow for cooling of Aspirator.
  2. Press down on Aspirator until Suction Feet are secure.
  3. Be sure the On/Off Switch is in the Off position.
  4. Be sure the Inline Hydrophobic Filter is properly connected to the vacuum port on the Suction Canister lid. The Inline Hydrophobic Filter prevents liquid from entering the vacuum pump.
  5. Plug the Aspirator into receptacle.
  6. Turn the On/Off Switch to the On position.
  7. Block the patient connection on the Suction Canister and adjust the Vacuum Control Knob to the desired vacuum.
    • To increase vacuum - Turn knob clockwise
    • To decrease vacuum - Turn knob counter-clockwise.
  8. Vacuum should be set as prescribed by Provider.
  9. Connect one end of the Patient Suction Tubing to the port on the Canister marked Patient Tubing.
  10. Connect the other end of the Patient Suction Tubing to the suction catheter and begin procedure as instructed by Provider.
  11. When procedure is completed, press the On/Off Switch to the off position. Do not overfill the canister.
  12. Remove the canister from its bracket and empty as instructed by your Provider.
  13. Replace Suction Canister and reconnect all suctioning tubing.

How to Maintain and CleanEasy VAC Asporator?

Turn the Easy Vac Aspirator off and disconnect from any external power source before cleaning.
Inline Hydrophobic Filter:
This filter cannot be cleaned. If it becomes contaminated or clogged, it must be replaced 
To replace Inline Hydrophobic Filter:

  • Disconnect filter assembly from Suction Canister and remove Suction Canister from the Aspirator 
  • Remove filter assembly from the Aspirator
  • Dispose of filter 
  • Install new filter (Part 1690) and reconnect tubing and elbow 
  • Tubing is single patient use only. DO NOT clean

 

Cleaning for Exterior Components:

 

  • Disconnect the Aspirator from power source and other connections before cleaning 
  • Use a cloth or sponge dampened with soap and water 
  • Wipe dry with a clean cloth or paper towel 
  • Store the Aspirator in a clean area free from grease, oil, and other sources of contamination

 

Medical EasyVac PM60 Aspirator Specification

Particulars Specifications
Dimensions Length: 13.25" (33.7 cm)
Width: 8" (20.3 cm)
Height: 9.75" (24.8 cm)
Weight 11.4 lbs (5.2 kg)
Electrical PM60: 108 - 132 VAC, 60 Hz, 5 Amps
Operating Temperature Range 50°F to 104°F (10°C to 40°C)
Storage Temperature Range Temperature: -4°F to 104°F (-20°C to 40°C)
Humidity: Maximum 95% Non-condensing
Suction Canister 800cc
Operating Vacuum Range 0-25" Hg (0-635 mmHg)
Flow @ Max Vac No Filter: = 31.0 l/min
Hydrophobic Filter: = 25.5 l/min
Gauge Accuracy 3-2-3% of Full Scale
Noise level = 64.9 db @ 1 meter
Storage Conditions Temperature: -4°F to 104°F. (-20°C. to 40°C)
Humidity: Maximum 95% Non-condensing

 

Warranty

5 years warranty

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.shopnebulizer.com

Close