DeVilbiss IntelliPAP 2 Standard Heated Humidifier

DeVilbiss IntelliPAP 2 Standard Heated Humidifier

Brand/Manufacturer: DEVILBISS
Hpfy Stores Save
Authorized Retailer Badge
  • Non Returnable
  • Prescription required
  • FSA Approved
  • Latex Free

The DeVilbiss IntelliPAP 2 Standard Heated Humidifier is a humidification device with a unique calmshell humidifier chamber design for IntelliPAP 2 machines. The air travels through a series of baffles inside the chamber in a snaking manner. The air travelling through the chamber can pick up extra humidity by guiding the airflow and creating turbulence. Furthermore, because the surface area of the water is bigger, the water level is shallower, allowing for a more humid air flow to be provided to the CPAP user. It's a compact machine that consists of a humidifier cradle and a water tank that sits on top of the humidifier cradle.

 

DeVilbiss IntelliPAP 2 Highlights

  • Larger surface area allows more water surface to come in contact with a patient air stream.
  • Lower water level provides a more efficient heating of the water in the chamber
  • Baffled air flow path, which increases turbulence in the airflow and contact with the water surface
  • Inlet deflector plate to evenly distribute incoming air over a larger area of the chamber
  • Stainless steel heat transfer plate for effective and efficient transfer of heat from the heater plate
  • Quick response heater that provides fast heat up time and accurately maintains set temperature

 

DeVilbiss IntelliPAP 2 Standard Heated Humidifier Features

 

What to buy with IntelliPAP 2 Heated Humidifier

 

Use and Care Instructions for Devilbliss Heated Humidifier

 

  • Air Supply Port Cover
    - When the IntelliPAP 2 machine and humidifier are connected, the air supply port cover folds into the circular crevice located on the back of the machine
  • Water Chamber Cleaning Tips
    - The water chamber for the IntelliPAP 2 Heated Humidifier needs to be cleaned daily
    Note: The water chamber may be placed in the dishwasher for an occasional cleaning
    - When placed in the dishwasher, the chamber must sit on the top rack
    -  For all other daily needs, hand wash the chamber with warm water and mild soap
  • Steps to withdraw the chamber
    Gently press on the chamber release latch which is located at the front of the chamber
    - Slide the chamber out of the cradle
    - Locate and push forward on the chamber disassembly lever which is directly behind the chamber release latch
    - The chamber will open into two halves
  • Cleaning Tips for the Humidifier Cradle
    The cradle which holds the water chamber should be cleaned weekly
    Note: The cradle should not be submerged in water
    - Instead, use a moist cloth to wipe the exterior of the unit
  • Steps when preparing to clean the cradle
    Remove the power source to allow the heater plate to cool
    - The cooling process may take up to 10 minutes
    - Once cooled, withdraw the water chamber from the inside of the cradle
    - Use the flow generator release button to separate the IntelliPAP 2 machine from the cradle base
    - Use a moist towel to cleanse the cradle
  • Instructions for Filling the Water Chamber
    When refilling the water chamber, use distilled water to help prevent mineral build-up
    - The IntelliPAP 2 water chamber has water level indicators located on the sides and top of the chamber
    - Do not surpass the specified markings when refilling the chamber, as it may cause water damage
  • Sealing Gasket Maintenance
    Before each use, examine the sealing gasket surrounding the circumference of the chamber
    - Ensure the gasket has been put back into place after each cleaning

IntelliPAP 2 Specifications

Particulars Specifications
Dimensions of Humidifier 7.5"L x 6"W x 4"H
Water Capacity 375 mL
Humidifier Cradle Material Components Polycarbonate, Latex Free
Water Chamber Material Components Lexan Plastic, Latex Free
Maximum Power Consumption 40 watts
DV6HH Electrical Requirements 11 - 17 VDC powered from CPAP
Heater Plate Thermal Cutout 239 degrees F (115 degrees C)
Heater Plate Temperature 84 degrees F to 158 degrees F (29 degrees to 70 degrees C)
Operating Temperature Range 41 degrees F to 104 degrees F (5 degrees C to 40 degrees C)
Operating Humidity Range 15% to 93% R.H. non-condensing
Operating Atmospheric Pressure Range 70.0 - 106.0 kPA
Weight of Humidifier 1.87lb

 

Warranty

5 years Warranty on Humidifier Cradle, 1 year Warranty on Water Chamber
 
 

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.shopnebulizer.com

Close