Hpfy Nebulizer

Advanced Search

3B Medical Luna II CPAP Machine With Heated Humidifier
Buy 3B Medical Luna II CPAP Machine With Heated Humidifier

3B Medical Luna II CPAP Machine With Heated Humidifier

Brand/Manufacturer: 3B MEDICAL
Hpfy Stores Save
  • FSA Approved

Same Day Shipping

 

Note: All PAP devices (CPAP, AUTOCPAP, BIPAP AND AUTOBIPAP) require a prescription from a physician to dispense. The prescription should include the type of machine needed and the pressure setting(s).

Prescription can be Faxed to 1.203.616.2851 or can be Emailed
 

 

3B Medical Luna II CPAP Machine With Heated Humidifier is designed with a crystal clear LCD display that allows for easy viewing of settings and is equipped with a single dial menu system for quick access. The machine features an innovative dual chamber humidifier that provides greater efficiency.

CPAP Machine Highlights:

  • Sleek modern design
  • Quite operation
  • Adjustable settings
  • Color LCD display
  • Dual chamber humidifier 
  • Full color LCD screen

Read More 

Luna II CPAP Machine Features

  • Helps to softens the pressure in exhaling
  • Reslex exhalation relief with 3 comfort settings
  • Detailed therapy data
  • Advanced clinical efficacy reporting
  • Real time cellular and WiFi data reporting
  • QR coded data for smartphone upload
  • Unibody design for a smaller footprint
  • Includes:
    • - Luna II CPAP with humidifier
    - Power Cord
    - 6 ft. Tube
    - Travel Case
    - SD Card
    - Power adapter
    - Water chamber

How to setup the device?

  1. Place the device on a firm, flat surface. 
  2. Attach the air filter to the filter cap.
  3. Install the filter cap containing the air filter to the device.
  4. Insert the plug of the power adapter into the DC Inlet on the back of the device.
  5. Connect the power cord to the power adapter.
  6. Plug the other end of the power cord into the power outlet.
  7. Connect one end of the tube to the air outlet of the device.
  8. Connect the other end of the tube to the mask according to the user manual for the mask.
  9. Connect the oxygen tube to the oxygen inlet of the mask. Keep in mind that you turn on the device before turning on the oxygen.
  10. Insert the SD card into the SD card slot.
  11. Connect the device to a power outlet, press the knob , and the device will start delivering air.

Specification

Particulars Values
Dimensions 274 mm — 184 mm — 115 mm
Water capacity To maximum fill line 360 mL
Temperature 5°C to 35°C (41°F to 95°F)
Relative Humidity 15% to 93% Non-condensing
Atmospheric Pressure 760 ~ 1060 cmH2O
Mode of Operation Continuous
AC Power Consumption 100 - 240 V ~, 50 / 60 Hz, Max 2 A
Pressure Range 4 to 20 cm H2O
Ramp 0 to 60 minutes.
Sound Pressure Level < 28 dB at the pressure of 10 cm H2O
Sound Power Level < 38 dB at the pressure of 10 cm H2O

 

 

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.shopnebulizer.com

Close