Luna II QX CPAP Features
- Leak ReportingÂÂ
- Advanced Algorithm comes with CPAP machinesÂÂ
- Exhalation reliefÂÂ
- Sleek, modern designÂÂ
- Integrated CSA detectionÂÂ
- Whisper quietÂÂ
- Full color LCDÂÂ
- Includes:
- Luna II QX CPAP with humidifier
- Power Cord
- 6 ft. Tube
- Travel Case
- SD Card
- Power adapter
- User manual
How to setup the device?
- Place the device on a firm, flat surface.ÂÂ
- Attach the air filter to the filter cap.ÂÂ
- Install the filter cap containing the air filter to the device.ÂÂ
- Insert the plug of the power adapter into the DC inlet on the back of the device.
- Connect the power cord to the power adapter.ÂÂ
- Plug the other end of the power cord into the power outlet.ÂÂ
- Connect one end of the tube to the air outlet of the device.ÂÂ
- Connect the other end of the tube to the mask.ÂÂ
- Now add oxygen at the mask connection.ÂÂ
- Insert the SD card into the SD card slot (only for the device that equipped with SD card).ÂÂ
- Connect the device to a power outlet, press the knob, and the device will start delivering air.
Specification
Particulars | Values |
Dimensions | 274 mm × 184 mm × 115 mm |
Water capacity | To maximum fill line 360 mL |
Temperature | 5°C to 35°C (41°F to 95°F) |
Relative Humidity | 15% to 93% Non-condensing |
Atmospheric Pressure | 760 ~ 1060 cmH2O |
Mode of Operation | Continuous |
AC Power Consumption | 100 - 240 V ~, 50 / 60 Hz, Max 2 A |
Pressure Range | 4 to 20 cm H2O |
Ramp | 0 to 60 minutes. |
Sound Pressure Level | < 28 dB at the pressure of 10 cm H2O |
Sound Power Level | < 38 dB at the pressure of 10 cm H2O |
Delivered Gas Temperature | = 43°C |
Warranty
Two-year warranty for the main unit, and three months for all accessories.