Maxtec MAXO2+A Oxygen Analyzer with Internal Sensor
Maxtec MAXO2+A Oxygen Analyzer with Internal Sensor

Maxtec MAXO2+A Oxygen Analyzer with Internal Sensor

Brand/Manufacturer: MAXTEC INC.
Hpfy Stores Save

Same Day Shipping

Maxtec MAXO2+A Oxygen Analyzer with Internal Sensor is intended as a tool for use by qualified personnel to spot-check or measure the oxygen concentration of a delivered air or oxygen mixture. Durable, compact design that permits comfortable, hand-held operation and easy to clean. Self-diagnostic check of analog and microprocessor circuitry.

Item #DescPkgRewardPrice 
R217P62 3.0"W x 4.0"H x 1.5"D Each $24.00


  • Maxtec MAXO2+A Oxygen Analyzer with Internal Sensor includes:
    - Users Guide and Operating Instructions
    - Lanyard
    - Threaded Adapter with Tygon Tubing
    - Flow Diverter
    - Blue Tee Adapter
  • Ideal for checking oxygen percent accuracy in concentrators
  • Ergonomic design fits comfortably in hand
  • Features a simple one-touch on or off and calilbration
  • Calibrates to room air (20.9%) or 100% oxygen
  • Oxygen-specific, galvanic sensor that achieves 90% of final value in approximately 15 seconds at room temperature
  • Internal MAX-250+ long life sensor
  • 5,000+ hours operation on 2 AA batteries
  • Easy one touch calibration, and impact resistant and drip proof
  • Quickly adapts to bore tube applications
  • Large LCD with 3 digit display
  • Low battery indication

More Information

  • MAX-250 Oxygen Sensor:
    The MAX-250+ oxygen sensor offers stability and extra life. The MAX- 250+ is a galvanic, partial pressure sensor that is specific to oxygen. It consists of two electrodes (a cathode and an anode), a teflon membrane and an electrolyte. Oxygen diffuses through the teflon membrane and immediately reacts at a gold cathode. Concurrently, oxidation occurs electrochemically at the lead anode, generating an electrical current and providing a voltage output. Electrodes are immersed in a unique gelled weak acid electrolyte which is responsible for the sensors long life and motion insensitive characteristis. Since the sensor is specific to oxygen, the current generated is proportional to the amount of oxygen present in the sample gas. When no oxygen is present, there is no electrochemical reaction and therefore, negligible current is produced. In this sense, the sensor is self-zeroing.




Measurement Range




Accuracy and Linearity

1% of full scale at constant temperature,
R.H. and pressure when calibrated at full scale

Total Accuracy

±3% actual oxygen level over full operating temperature range

Response Time

90% of final value in approximately 15 seconds at 23°C

Warm-up Time

None required

Operating Temperature

15°C - 40°C (59°F - 104°F)

Storage Temperature

-15°C - 50°C (5°F - 122°F)

Atmospheric Pressure

800-1013 mBars


0-95% (non-condensing)

Power Requirements

2, AA Alkaline batteries (2 x 1.5 Volts)

Battery Life

Approximately 5000 hours with continuous use

Low Battery Indication

"BAT" icon displayed on LCD

Sensor Type:

Maxtec MAX-250+ galvanic fuel cell

Expected Sensor Life

>900,000 O2 percent hours minimum 2-years in typical medical applications

Model Dimensions

3.0"(W) x 4.0"(H) x 1.5"(D) [76mm x 102mm x 38mm]


0.4lb (170g)


24 months warranty
The MAXO2+ Analyzer is designed for medical oxygen delivery equipment and systems. Under normal operating conditions, Maxtec warrants the MAXO2+ Analyzer to be free from defects of workmanship or materials for a period of 2-years from the date of shipment from Maxtec, provided that the unit is properly operated and maintained in accordance with Maxtec;s operating instructions. Based on Maxtec product evaluation, Maxtec;s sole obligation under the foregoing warranty is limited to making replacements, repairs, or issuing credit for equipment found to be defective. This warranty extends only to the buyer purchasing the equipment directly from Maxtec or through Maxtec;s designated distributors and agents as new equipment.
Maxtec warrants MAXO2+ oxygen sensor in the MAXO2+ Analyzer to be free from defects in material and workmanship for a period of 2-years from Maxtec;s date of shipment in a MAXO2+ unit. Should a sensor fail prematurely, the replacement sensor is warranted for the remainder of the original sensor warranty period.
Routine maintenance items, such as batteries, are excluded from warranty. Maxtec and any other subsidiaries shall not be liable to the purchaser or other persons for incidental or consequential damages or equipment that has been subject to abuse, misuse, misapplication, alteration, negligence or accident.
These warranties are exclusive and in lieu of all other warranties, expressed or implied, including warranty of merchantability and fitness for a particular purpose.

Customer Reviews

Questions & Answers

Please enter your and your friends email address below.
Fields marked with * are compulsory

Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using