Precision Medical EasyPulse5+6 Oxygen Conserving Regulator

Precision Medical EasyPulse5+6 Oxygen Conserving Regulator

Brand/Manufacturer: PRECISION MEDICAL, INC
Hpfy Stores Save
  • FSA Approved

Precision Medical EasyPulse5+6 Oxygen Conserving Regulator has 6 continuous flow settings, to compliment the 1 thru 5 pulse settings. Even with the added continuous flow settings, it weighs in at a mere 9.9 oz and is only 4.75 inches long, making it still the smallest and lightest conserving regulator available. With the conserving ratio of up to 5.7 to 1, you enjoy the same great savings you have always enjoyed with the EasyPulse5.

Why to choose EasyPulse5+6 Oxygen Conserving Regulator?

  • Provide supplemental oxygen to patients who may have difficulty extracting oxygen from the air they breathe.
  • For patients who would normally receive the oxygen via a nasal cannula. The device delivers 100% oxygen at flow settings. 
  • Used as an oxygen saving device that reduces the drying of the airways.

Note: Cannula is not included with the item.

Estimated Shipping Time: 7 to 10 Days

EasyPulse5+6 Oxygen Conserving Regulator Features

  • Precision Medical EasyPulse5+6 Oxygen Conserving Regulator delivers a front loaded tapered waveform
  • CMV Technology: All the oxygen is delivered in the first third of the inspiratory phase. With the added security of more continuous flow options, you have the most versatile oxygen conserving device available
  • Certifications: It meets or exceeds the requirements of the Medical Device Directive(MDD), Council Directive 93/42/EEC Concerning Medical Devices, Directive 2007/47/EC of The European Parliament and Council and all applicable design and safety related standards

What to buy with EasyPulse5+6 Oxygen Conserving Regulator?


How to Operate Precision Medical EasyPulse5+6?

  1. Attach a standard adult single lumen oxygen nasal cannula, no longer than 7 feet (2.1 m) to the Conserver’s outlet according to the cannula manufacturer’s instructions.
  2. Place the cannula over your ears and position the prongs in your nose as instructed by your Provider or cannula manufacturer.
  3. Slowly open cylinder valve counterclockwise, until completely open.
  4. Turn dial on the Conserver until indicating pointer is aligned with the prescribed setting.
  5. Breathe through your nose.
  6. To remove the Conserver from cylinder:
    • Completely close oxygen cylinder valve.
    • Turn the Conserver dial to any “Continuous” position.
    • Wait for oxygen to stop flowing from Conserver.
    • Remove the Conserver from cylinder valve.
    • DO NOT try to loosen T-handle beyond stop. Damage to the Conserver will occur.

How to clean EasyPluse5+6 Oxygen Conserving Regulator?

    • Disconnect all connections before cleaning
    • After each use, clean exterior of the Conserver with a clothdampened with mild detergent and water
    • Wipe dry with a clean cloth
    • Store the Conserver in a clean area free from grease, oil, and othersources of contamination
  • Warning:
    • Ensure the compatibility of the oxygen conserving equipment and all of the parts and accessories used to connect to the patient before use
    • Ensure that the oxygen delivery settings were determined and recorded for the patient individually together with the configuration of the equipment to be used, including accessories
    • Periodically reassess the setting(s) of the therapy for effectiveness
    • Always follow standards for Medical Gas Products and High-Pressure Oxygen Handling. In the United States, ANSI, CGA, and G-4 applies
    • Keep cylinder valve closed at all times when cylinder is not in use
    • NO OXYGEN is delivered when the pointer is aligned with OFF
    • DO NOT USE without a seal. For optimum safety, use only a Precision Medical, Inc. InletSeal. The Inlet Seal supplied with the Conserver is reusable. DO NOT USE any othertype of seal

  • Contraindication:
    • Should not be used for tracheotomised patient, patients who breathe through their mouths or oxygen masks and source of oxygen while sleeping
    • DO NOT use if dirt or contaminants are present on or around cylinder, valve, theConserver or connecting devices
    • DO NOT use oils, greases, organic lubricants or any combustible materials on or near theConserver. Wash and dry hands properly prior to use
    • DO NOT use a humidifier with the Conserver
    • DO NOT allow cylinders to tip or fall. Secure gas cylinders so they cannot fall. Foroptimum safety keep cylinder upright whenever possible
    • DO NOT store cylinders near sources of heat or flame
    • Smoking during oxygen therapy is dangerous and is likely to result in serious injury ordeath of the patient and others from fire
    • There is a risk of fire associated with oxygen equipment and therapy. Do not use nearsparks or open flames
    • Use only medical grade oxygen. In the United States, USP applies

Precision Medical EasyPulse5+6 Specifications

ParticularsSpecification
DimensionsLength:4.75 in (12.07 cm)
Width:2.63 in (6.7 cm)
Height:2.5 in (6..35 cm)
Weight9.9 oz (.279 kg)
Inlet Pressure Range300 - 3000 psig (2068 - 20684 kPa)
Internal Regulated Pressure50 psig (345 kPa)
Operating Altitude RangeSea level to 10,000 ft above sea level (Sea level to 3,048 m above sea level)
Pulse Settings1, 2, 3, 4 and 5
Flow Settings1, 2, 3, 4, 5 and 6 L/min Continuous
Savings RatioUp to 5.7 : 1
Cannula RequirementsMaximum 7 ft long adult standard single lumen oxygen nasal cannula
Oxygen Cylinder ConnectionsCGA 870 Post Valve

Pulse Volume Chart

Setting

Pulse Volume @ Rate Of

Minute Volume

15202530
117 mL13 mL10 mL9 mL260 mL/min
228 mL21 mL17 mL14 mL420 mL/min
337 mL28 mL22 mL19 mL560 mL/min
447 mL35 mL28 mL23 mL700 mL/min
557 mL43 mL34 mL29 mL860 mL/min
2 L/min

N/A

2000 mL/min (2 L/min)

EasyPulse5+6 Warranty

2 years from date of shipment

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.shopnebulizer.com

Close