CareFusion AirLife Misty Max 10 Disposable Nebulizer
CareFusion AirLife Misty Max 10 Disposable Nebulizer

CareFusion AirLife Misty Max 10 Disposable Nebulizer

Brand/Manufacturer: CAREFUSION CORPORATION
Save
  • FSA Approved

CareFusion AirLife Misty Max 10 Disposable Nebulizer delivers fast and effective treatment more efficiently to a wide range of patients. It features advanced, one-piece jet design which delivers high output rates, helping to contribute to faster treatment times and supporting consistent medication delivery. The anti-spill design helps prevent medication waste and allows the unit to be used at an angle to accommodate various patient positions. Misty Max 10 Nebulizer is recommended for single patient use.

Airlife Misty Max 10 Nebulizer Highlights

  • Fast treatment times 
  • Low residual volume 
  • High percentage of respirable particles 
  • Anti-spill design helps prevent medication wastage 
  • Secure top and bottom seals prevent leakage

Item #DescPkgRewardPrice 
2430 Nebulizer Only Each $0.09
$2.65
$1.79
2432 With Adult Aerosol Mask Each $0.13
$4.65
$2.59
2435 With 22mm Tee Adapter, 7ft Oxygen Tubing with Blue Rigid Tip and Mouthpiece Each $0.12
$5.84
$2.39
2430 Nebulizer Only 5/Pack $0.37
$14.29
$7.45
2430 Nebulizer Only 50/Case $3.50
$90.55
$69.99
2432 With Adult Aerosol Mask 50/Case $3.75
$105.65
$74.99
2435 With 22mm Tee Adapter, 7ft Oxygen Tubing with Blue Rigid Tip and Mouthpiece 5/Pack $0.58
$19.95
$11.55
2435 With 22mm Tee Adapter, 7ft Oxygen Tubing with Blue Rigid Tip and Mouthpiece 50/Case $5.50
$178.99
$109.99

Misty Max Nebulizer Features

  • Full 10 cc capacity provides medication dosing flexibility 
  • Tinted snap-in jet remains in place and allows for removal during cleaning 
  • Unique, integrated jet/baffle design increases reliability and consistency in medication delivery 
  • Single twist closure of top and bottom gives the proper assembly confirmation 
  • Angled operation accommodates various patient positions 
  • Clear base with visible graduations facilitate medication loading and visualization of aerosol delivery 
  • Jet technology delivers efficient, high output rates that result in fast treatment times 
  • AirLife Disposable Nebulizer has easy to assemble rigid tubing connector and crush-resistant tubing
  • Provides fine particles with a tighter distribution than conventional nebulizers 
  • Help ensure consistent medication delivery while offering more flexibility in treatment options 
  • Nebulizer is available preassembled and fits virtually all common Nebulizer Masks and Adapters 
  • One-piece jet design and single-thread top connection make Misty Max 10 easy to disassemble and reassemble

Misty Max Nebulizer Analysis

Competition Analysis With Conventional Nebulizers:

  • Particle size is an important characteristic of nebulizer performance. Carefusion Misty fast nebulizerr creates finer particles with a tighter distribution than any of the other nebulizers tested. As a result, the respirable fraction performance of Misty Max nebulizer is significantly higher than that of competitive products.

  • CareFusion AirLife Misty Max 10 Disposable Nebulizer

  • CareFusion Airlife Misty Max 10 Ddisposable Nebulizer delivers significantly higher inhaled respirable mass than the other nebulizers when tested in the angled position.
  • It deliver significantly higher inhaled respirable mass than the other nebulizers when tested in the vertical position.
  • Misty Fast Nebulizer delivers an averaged inhaled respirable mass approximately 14% higher than the closest competitor.
  • It has the lowest average drug residual volume compared to the other nebulizers tested.

Misty Max 10 Nebulizer Specification

Performance Characteristics5 L/min flow8 L/min flow10 L/min flow
MMAD Mass median aerodynamic diamet (µm)2.21µM±0.0671.61µM+0.091.30µM ±0.07
GSD Geometric standard deviation2.05±0.142.18 ±0.2622.20 ±0.06
Respirable fraction % < 4.7µm (by mass)79.7µM±1.785.2 ±3.291.5µM ±0.9
Output rate (g/min)0.252gpm ±0.0090.325gpm ±0.0100.329gpm ±0.010
Treatment time 3 mL albuterol solution (min)9.9 ±0.038.16 ±0.307.36 ±0.26
Residual (g)0.91g ±0.0630.92g ±0.060.89g ±0.04
Operating pressure (psi)10.7psi ±0.524.9psi ±0.334.2psi ±0.08

Data presented: Mean ±standard deviation.

Customer Reviews

Questions & Answers


 
 
question image
Must the blue (inside the cup) agitator piece be snapped into place before attaching the top piece or is it best to place it in there loosely?   Will the top automatically hold it down tight?
caregiver - 11/17/2014 10:29:42 AM
facebooktwitter
answer image
The blue piece inside the cup just places on loosely, once you screw the top piece on it will hold it in place.
Customer Care - 11/21/2014 5:33:11 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.shopwheelchair.com

Close