Drive DeVilbiss 10L Oxygen Concentrator

Drive DeVilbiss 10L Oxygen Concentrator

Brand/Manufacturer: DEVILBISS
Hpfy Stores Save
Authorized Retailer Badge
  • Prescription required
  • FSA Approved
  • Latex Free
  • Made in USA

Drive DeVilbiss 10L Oxygen Concentrator is designed to provide optimal oxygen delivery for patients with varying flow requirements. It;s intended use is to provide supplemental low flow oxygen therapy for patients suffering from COPD, cardiovascular disease, and lung disorders. The oxygen concentrator is used in home type environments, homes, nursing homes, patient care facilities, etc.

Note: Prescription can be emailed or faxed to 1.203.616.2851. To email please: Click Here


Price Match Guarantee

 

 

 

PayPal Credits6 Payments: Starts From $216.50

 

 

 

Item # Desc Pkg Price
1025DS 10 L, 12"L x 13.5"W x 24.5"H Each
$1569.65
$1426.99

Features

  • Drive DeVilbiss 10L Oxygen Concentrator is built in the same shell as the 5 Liter, and also compatible with cylinder transfill systems
  • Substantially smaller and lighter than competitive 10 Liter concentrators
  • Capable of delivering 87% to 96% of O2 purity from 2 to 10 LPM, the 10 Liter Concentrator is an ideal investment for patients
  • Exclusive DeVilbiss OSD (Oxygen Sensing Device), standard on every unit, monitors the oxygen produced and ensures patient safety and reliability for longer service intervals
  • Equipped with accessible patient controls, bright LEDs that can be seen from a distance, protected cannula fitting and recessed humidifier nook to prevent damage
  • Sold separately, the Transfill Caddy is designed with a steel frame to simply connect the 18 x 14 inch shelf, designed to support up to 40 lbs., to the DeVilbiss 10L Concentrator
  • Instruction Guide

More Information

  1. Press the power switch to the “On” position. When the unit is turned “On,” all three lights (Service Required, Low Oxygen and Normal Oxygen) on the front panel will illuminate briefly and an audible signal will briefly alarm confirming that the LEDs and audible signal are functioning properly . The unit will then operate in “start up” mode with the Low Oxygen light lit until a normal oxygen level is achieved, at which time the Normal Oxygen light will remain lit. The “start up” may take up to 15 minutes.
  2. Check the flow meter to make sure that the flow meter ball is centered on the line next to the prescribed number of your flow.
  3. Your DeVilbiss concentrator is now ready for use, properly position the cannula or mask and allow 15 minutes for the oxygen concentrator to reach stated performance.

 

New Filter Doors

 

  • All 525/1025 series concentrators produced on/after this date will no longer require the use of the gross particle filter and ships with the new filter door. However, the new door design can accommodate a gross particle filter. The filter door has been designed to capture gross particles without the filter, while increasing the air flow into the concentrator. This design change does not adversely alter the performance or useful life of the intake HEPA filter or other internal components. 
  • The new filter door will be backwards compatible with older 525/1025 models & the old filter door will be forward compatible with the new 525/1025 models. 
  • The part number for the filter door will remain the same: 525DD-639. The new filter door will be dropped in as part of the running change for stationary concentrators, as any remaining stock of the old filter door sells out.

How does DeVilbiss Oxygen Concentrator Work?

Oxygen concentrators are the most reliable, efficient and convenient source of supplemental oxygen available today. The oxygen concentrator is electrically operated. The unit separates oxygen from room air which allows high-purity supplemental oxygen to be delivered to you through the oxygen outlet. Although the concentrator filters the oxygen in a room, it will not affect the normal amount of oxygen in your room.

 

What to buy with Drive DeVilbiss 10L Portable Oxygen Concentrator?

 

 

Specification

Particulars

Dimensions

Outlet Pressure

20.0 ± 1.0 psi (138 kPa +/- 7 kPa)

Oxygen Percentage 2-10 LPM, 87-96%
Delivery Rate 2.0 to 10.0 LPM

Electrical Rating

120 V, 60 Hz, 6.1 Amp

Operating Voltage Range

102-132 V~, 60 Hz

Oxygen Percentage 2-10 LPM=87% - 96%
Operating Altitude

(tested at 70°F {21°C} only) 0-1500 M (0-5000 ft)

Operating Environment Range 41°F (5°C) to 95°F (35°C), humidity range of 15% to 93% noncondensing
Power Consumption

120 vac, 60HZ: 639 watts average

Weight

42 lbs. (19 Kilograms)

Safe Working Load

53 lbs. (24 Kilograms)

Dimensions

24.5"H x 13.5"W x 12"D
(62.2 x 34.2 x 30.4 cm)

Maximum Limited Pressure

35 PSIG (241 kPa)

Operating System

Time Cycle / Pressure Swing

The visible “low oxygen” indicator will activate at the following level

86% ± 3% (The audible alarm will alert at approximately 85%. At less than 60%, the red “service required” light will activate.)
Storage Conditions -13°F (-25°C) to 158°F (70°C), humidity range of 15% to 93% non-condensing, including condensation

Warranty

Three Year Warranty

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.shopnebulizer.com

Close