Drive Model 180 Nebulizer

More Instructions About Drive 180 Nebulizer

To Use:

• Use only solutions with an oil or glycerin base. For best results, fill bottle not more than one-quarter full.
• Nebulizer can be operated with either compressed air or a hand bulb. If hand bulb is used, grasp the bulb firmly using the fingers against the palm of the hand, rather than two or three fingers against the thumb.
• For a dry vapor, turn the little metal table inside the bottle to a horizontal position. For a moist vapor, turn it to a perpendicular position.
• Nebulizer is equipped with both a vented and a plain nasal guard. The nasal guard with ventilating grooves prevents any undesirable excess of air pressure in the nasal cavities. This extra low-pressure feature ensures against any possible harm to delicate membranes.
• The plain guard is for inflation purposes. In attaching either nasal guard to the nebulizer, give it a slight twist to make it fit tightly.

To Clean:

• Unscrew and remove spray unit from the bottle.
• Unscrew and remove glass tube with its metal ferrule.
• Wipe the nozzle point clean. If this does not remove obstruction, run a fine wire through the glass tube and metal ferrule.
• Replace glass tube and screw metal part to bottle.

To Sterilize:

• Remove plastic nasal guard.
• Disassemble the atomizer by rotating the cap in a counterclockwise direction.
• The spray tube assembly can be removed from the cap by rotating it in a counterclockwise direction.
• Boil metal parts and plastic guard.

Customer Reviews