Graham-Field Jackson Improved Model Laryngectomy Tubes
Graham-Field Jackson Improved Model Laryngectomy Tubes

Graham-Field Jackson Improved Model Laryngectomy Tubes

  • Made in USA

Item 1398-15, 1398-1#6 is backorder and will be available to purchase once it is back in stock.

Graham-Field Jackson Improved Model Laryngectomy Tubes features new style rotating lock with no protruding parts. It has a complete inner and outer cannula. This Graham Field Laryngectomy tube is non-fenestrated and has flush cut distal end. Manufactured using stainless steel and has a standard length.

Note: Prescription can be emailed or faxed to 1.203.616.2851. To email please: Click Here

Item #DescPkgRewardPrice 
1398-1#8 Size: 8 Each $2.49
1398-14 Size: 4 Each $2.55
1398-1#7 Size: 7 Each $2.71

Care and Cleaning Instructions of Laryngectomy Tube

Stainless Steel Trachea and Laryngectomy Tube (Trach Tube)
Note: In addition to the method described below, an ultrasonic cleaner or autoclave may be used to clean trach tubes. You may also cold-soak trach tubes in a formic-acid-based germicidal solution that does not contain phenol; follow the manufacturers recommendations for any of these methods.

Warning: Clean trach tubes before first use, then daily. Remove from stoma before cleaning - Do Not clean while in stoma.‚ 
Note: DO Not soak in, wash with, or expose trach tubes to peroxide, enzymatic cleaners, or sodium hydroxide; these chemicals may cause damage to the tubes. Do Not dry-heat sterilize trach tubes. DO NOT expose trach tubes to temperatures above 400‚°F (204.4‚°C).
  • Soak trach tube in mild solution (one tablespoon dish soap to one quart of tap water) of dish soap for one hour to dislodge mucus.‚ 
  • Use a clean, appropriately-sized trachea brush, bent to the curve of the trach tube, to clean the inside and outside of the outer cannula and the outside of the inner cannula. You may also use a clean, soft toothbrush to clean the outside and neck plate of the outer cannula.‚ 
  • Place both outer and inner cannulae in a pan of distilled water, bring to a boil, and boil for thirty minutes.‚ 
  • Carefully remove both cannulae from the water with a clean tool. Once cool enough to handle, wipe them dry with a clean, soft cloth.‚ 
  • Inspect the trach tube: ensure the components work and operate freely. Inspect the neck plate swiveling and locking mechanisms and all solder joints. If all components are in good condition, the trach tube is now ready for use.

Warning WARNING: Cancer and Reproductive Harm -

Customer Reviews

Questions & Answers

question image
What are the lengths  of the #5. #6, and #7  Jackson improved trach tubes?  The one I have is 2 and 3/4 inches long.  It's falling apart-need new one soon.
Larry Horne - 12/13/2014 8:43:35 PM
answer image
The lengths are as follows: For #5: 3 and 3/8 inches, for #6: 3 and 5/8 inches and for #7: 4 inches. For more information on this, please refer to the size chart.
Customer Care - 10/16/2020 3:11:45 AM
question image
Yes, my sister recently had one of these placed in and there is no cap, is there one available to purchase for showering or for going out?
Durae Reece - 9/15/2014 7:32:51 PM
answer image
The cap is not available with this product for showering or for going out.
Customer Care - 9/19/2014 12:19:21 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory

Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using